WhatsApp: +8615306204105
Email: xuhejian@jelio.com.cnJELIO · Factory automation
JELIO Factory & Automation Overview
Meet JELIO through the company introduction video already featured on our homepage. The film moves from an exterior company view to automation equipment, tooling and machine controls, offering a practical starting point for a supplier discussion. For a PCB depaneling project, connect that overview with a specific machine family rather than choosing equipment from factory footage alone. Explore our router depaneling machines, integrated router-and-saw systems and published manufacturing capabilities below. This page brings the video together with related equipment specifications, a platform comparison and a clear route to discussing your board drawings, production layout and acceptance requirements with the JELIO company team.
Video playback is temporarily unavailable. Open the original video or contact JELIO.
DIRECT ANSWER
What does the JELIO factory automation video show?
The JELIO company video introduces the business through exterior views, automation equipment, tooling and machine-control scenes. It provides supplier context for buyers considering PCB depaneling equipment. Start with the related router and integrated systems on this page, then use their published specifications and the manufacturing capability page to prepare a board-specific technical discussion.
From company overview to a depaneling shortlist
The footage includes broader automation subjects as well as equipment views. The tooling scene at approximately 41 seconds is captioned as an online locking screw machine; the equipment sequence near 82 seconds shows enclosed automation platforms. These scenes help you understand the scope of the company film and identify the questions relevant to your own production line.
For depaneling, the useful next step is to compare a defined panel envelope, tool type and board-handling arrangement. JELIO’s manufacturing capability page describes dedicated machining, assembly and testing zones. Its technical support service describes sample cutting, edge analysis and dimensional verification. Use those services to connect the supplier overview with your actual application.
Three moments from this video
CURRENT JELIO CATALOG
Related Products
Explore the following equipment pages for model-specific configuration details.
Related product
JLO-C3532/JLO-C5045
Dual-station routing for a defined PCBA panel and fixture.
View product & specifications
Related product
JLO-CXJ3235/JLO-CXJ4550
Milling and straight saw cutting in an integrated platform.
View product & specifications
Related product
JLO-CXJ3235
An integrated platform for evaluating line handling and separation together.
View product & specificationsRELATED PRODUCT SPECIFICATIONS
Technical Specifications
Source: JLO-C3532/JLO-C5045. These are the published specifications for this related catalog product.
| Parameter | Published value |
|---|---|
| Model | JLO-C3532/JLO-C5045 |
| Number of Workstations | Dual Station |
| Max. PCB Depaneling Size | 350mm(X)*320mm(Y)(Single Station)/500mm(X)*450mm(Y)(Single Station) |
| Cuttable PCBA Thickness | 0.5~4mm |
| Cutting Accuracy | ±0.05mm |
| Repeatability | ±0.02mm |
| Spindle Tool Range | φ0.5~3mm |
| Spindle Speed | MAX.60000rpm |
Which depaneling platform should enter your supplier shortlist?
| Decision point | JLO-C3532/JLO-C5045 | JLO-CXJ3235/JLO-CXJ4550 | JLO-CXJ3235 |
|---|---|---|---|
| Published model | JLO-C3532/JLO-C5045 | JLO-CXJ3235/JLO-CXJ4550 | JLO-CXJ3235 |
| Panel envelope | 350mm(X)*320mm(Y)(Single Station)/500mm(X)*450mm(Y)(Single Station) | 320mm(X)*350mm(Y)(per station)/450mm(X)*500mm(Y)(per station) | 320mm(X)*350mm(Y) (Single Station) |
| Cutting accuracy | ±0.05mm | ±0.05mm | ±0.05mm |
| Tool-change arrangement | Manual tool change / Automatic tool change (optional) | Manual tool change / Automatic tool change (optional) | Automatic tool change |
RECOMMENDED BUYER WORKFLOW
A practical supplier evaluation sequence
- 01
Define the board
Share the panel drawing, components near the edge and the required output.
- 02
Shortlist a platform
Compare routing, combined cutting and line integration against the catalog.
- 03
Plan sample evaluation
Agree the sample, edge checks and dimensional inspection with technical support.
- 04
Review the quotation
Align machine configuration, fixtures, interfaces and service scope.
Prepare a supplier evaluation
For procurement teams, a factory video is most useful when it leads to a clear configuration request. Include the incoming panel dimensions, substrate description, drawing revision, required handling direction and production mix. Ask for the machine model and installed options to be listed together so that proposals can be compared on the same basis.
Engineering and quality teams can add a panel acceptance checklist covering the routed edge, separation dimensions, component clearance and handling marks. Review the company document library alongside the proposed equipment, and use the customization service for fixtures or interfaces that need to follow your layout.
Frequently asked questions
What is the purpose of this company video?
It introduces JELIO through company, automation equipment and control-system scenes. Use it alongside model pages and manufacturing information when evaluating the supplier.
Which product family should I review first?
Start with router depaneling for routed contours, integrated router-and-saw equipment when both tool types matter, or an inline platform when the handoff to other stations is central to the project.
Can I discuss a custom fixture or line interface?
JELIO’s customization service covers equipment configuration and integration discussions. Send your board and line requirements with the inquiry.
What should I send to obtain a useful quotation?
Provide the panel drawing, board thickness, component layout, required handling and intended production workflow. Identify the machine family you are comparing and any required accessories.
Where can I review company credentials and quality information?
The Certificates & Quality Documents library contains original company qualifications and R&D documents. The manufacturing page describes machining, assembly and testing capabilities.
Related Videos & Guides
0:50PCB Router Fixture & Board Changeover Video
Router / Milling Depaneling
0:33Router-Saw Depaneling: Vacuum Board Transfer Video
Integrated Systems
NEXT STEP
Discuss your automation project
Share your panel drawing and application requirements with the JELIO team.
